Welcome to Citrix Guide. I hope you find our citrix articles useful

citrix

Hotfix readme name: PSE450W2K3R01.HTML
Hotfix package name: PSE450W2K3R01.MSP
For: Computers running Windows Server 2003 (32-bit) with one of the following installed:

Presentation Server 4.5
Citrix Access Essentials 2.0

Replaces: PSE450W2K3001,PSE450W2K3002,PSE450W2K3003,PSE450W2 K3004,PSE450W2K3005,PSE450W2K3006,PSE450W2K3007,PS E450W2K3008,PSE450W2K3009,PSE450W2K3010,PSE450W2K3 011,PSE450W2K3012,PSE450W2K3013,PSE450W2K3014, PSE450W2K3016,PSE450W2K3017,PSE450W2K3018
Date: July, 2007
Language supported: English (US)
Readme version: 1.0
Readme Revision History
VersionDateChange Description 1.0July, 2007 Initial release
Where to Find Documentation

This document describes the issue(s) solved by this hotfix rollup pack and includes installation instructions. You can find more information about Presentation Server 4.5 in the Presentation Server Administrator's Guide. All product documentation is available from the Citrix Web site at http://www.citrix.com/support.
For the current version of Welcome to Citrix Presentation Server (Read_Me_First.html), see CTX113690. For the current version of the installation checklist, see CTX113962. Special Installation Instructions

To get the benefits of all new features and enhancements available with this release, download and install the following components in order. To download the components, log on to your My Citrix account and follow the navigation instructions given for each step below.
Important: It is important that you install all components in the recommended order. See the documentation available with each download component for detailed installation instructions.

Download and install Hotfix Rollup Pack 1 (32-bit platforms: PSE450W2K3R01.msp, 64-bit platforms: PSE450W2K3X64R01.msp).
Navigation: My Citrix > Downloads > Hotfixes, Rollups & Service Packs > Presentation Server 4.5 and Components
Download and upgrade the Access Management Console. Accept the defaults to modify your installation.
Navigation: My Citrix > Downloads > Server Components > Access Management Console
Important: You must install the console updates before you install updates for the remaining features and components. The new console snap-ins must be present before the new features can be installed successfully.
Download and upgrade to Web Interface 4.6.
Navigation: My Citrix > Downloads > Common Technology Components > Web Interface 4.6
Download and upgrade to Version 10.100 of your preferred Presentation Server Client for Windows.
Navigation: My Citrix > Downloads > Clients > Citrix Presentation Server Client 10.1
When you are finished, deploy the upgraded client to end-users.
For Platinum and Enterprise editions only:
- To support application streaming, download and upgrade to Version 1.1 of the Citrix Streaming Client.
  Navigation: My Citrix > Downloads > Clients > Citrix Presentation Server Client 10.1 > Streaming Client Version 1.1
  When you are finished, deploy the updated Streaming client to end-users.
- To upgrade your profiling workstation, download and install Version 1.1 of the Streaming Profiler. Navigation: My Citrix > Downloads > Server Components > Streaming Profiler
Restart the server for all changes to take effect.
When you open the Access Management Console after restarting an upgraded server, a message box lists the upgraded snap-ins, such as â€œPresentation Server.â€ Select Upgrade to install the new snap-ins, and discovery starts automatically.
Repeat the previous steps for all servers in the farm.

Important Note(s) about this Hotfix Rollup Pack

Caution: Do not install this hotfix rollup pack on 64-bit operating systems. Although Citrix uses the same code base in the development of both the 32-bit and 64-bit versions of Presentation Server, the binaries and files differ. Installing this hotfix rollup pack on 64-bit operating systems is not supported and can yield unpredictable results.
Caution: Several items in this hotfix rollup pack require you to edit the registry. Using Registry Editor incorrectly can cause serious problems that may require you to reinstall your operating system. Citrix cannot guarantee that problems resulting from the incorrect use of Registry Editor can be solved. Use Registry Editor at your own risk.
Note: Before installing this hotfix rollup pack on servers licensed for Standard Edition, you must migrate those servers to Advanced Edition. Standard Edition was discontinued on Citrix Presentation Server 4.5; installing this hotfix rollup pack on servers licensed for Standard Edition might cause the following error message to appear:
Citrix Presentation Server is unable to retrieve the product edition. Check to see if the Citrix Independent Management Architecture service is running without errors. Citrix Presentation Server cannot request licenses until it can obtain the product edition â€“ no client devices can connect. If necessary, set the product edition in the Access Management Console. The product must be set to the same edition as your licenses.
To migrate your servers to Advanced Edition, you must obtain an Advanced Edition license and then change the server edition in the Access Management Console from Standard to Advanced. For information about obtaining an Advanced Edition license, visit your My Citrix account or contact your reseller.
Installing this hotfix rollup pack partially invalidates the following hotfixes. This happens because not all fixes in these hotfixes are included in the hotfix rollup pack. Obtain or request the corresponding replacement hotfixes for any invalidated fixes you require as follows: Invalidated Hotfix Replacement Hofix PSE450W2K3015 PSE450W2K3019 PSE450W2K3020 PSE450W2K3021
The fixes included in the following hotfixes are included in this hotfix rollup pack. However, because the hotfixes were released after this hotfix rollup pack, they remain in Add/Remove Programs after installing this hotfix rollup pack:
PSE450W2K3022
See Knowledge Center article CTX113832 for known install behaviors and their workarounds.
When adding the ValidSites registry key to redirect specific URLs from server to client, specify the URLs without http://. For example, add Citrix Systems - Application Delivery Infrastructure for a Dynamic World, not http://www.citrix.com. [#161177]
To enable Microsoft Vista and Office 2007 compatibility, you must install Hotfix Rollup Pack 1 before installing any Access Management Console extensions. [#162886]
If you remove Hotfix Rollup Pack 1 after publishing an application with Hotfix Rollup Pack 1 and the Hotfix Rollup Pack 1-level Access Management Console, the console might throw an exception when you attempt to edit the properties of that published application. This problem does not occur when you edit the properties of a published application that was created before Hotfix Rollup Pack 1 was installed. [#166266]

Microsoft Windows Vista/Office 2007 Compatibility Updates

This hotfix rollup pack introduces the following compatibility udpdates insupport of Microsoft Windows Vista and Office 2007.
Note: To get the fulll benefit of these compatibilityupdates, you must also deploy Version 10.100 or later of the Presentation ServerClient. Enhanced (16-, 32-, and 48-bit) Icon Support

Support for enhanced icons allows administrators to publish applications with32-bit color depth icons if the application supports them.
Requirements:

Program Neighborhood Agent 10.100
The Web Interface 4.6
Applications must be published using the latest release of the Presentation Server Extension

Considerations:

The Access Management Console cannot display 32-bit color icons. The console displays icons with 4-bit color depth.
To enable (or disable) existing applications in the farm to display 32-bit color depth icons, republish the applications using the following procedure.
Note: You must perform Step 4 for each published application. [#163159]
1. In the Access Management Console, select your Presentation Server farm.
2. In Common Tasks, select Modify farm properties and then select Modify all properties.
3. To configure icon color settings, go to Farm Properties > Presentation Server > General and then under Enable 32 bit icon color depth select the Enable check box to enable 32 bit icon color depth (or clear the check box to disable 32 bit icon color depth).
4. To enable your applications to use the new icon color settings, in the Access Management Console, delete the published applications and then republish them.
Program Neighborhood displays icons with 4-bit color depth.

Microsoft Office Live Preview Support

The Microsoft Office 2007 Live Preview feature allows you to quickly see howformatting options will look, without actually applying them. Live Preview isenabled by default. To disable Live Preview, change the Flag value underHKEY_LOCAL_MACHINE\SOFTWARE\Citrix\CtxHook\Ap pInit_Dlls\UIHook to 0 (whenenabled, the Flag value is set to 6). Changing the Flag value to anything otherthan 0 or 6, or changing any of the other values/subkeys under UIHook, mightresult in Live Preview not functioning properly.
Note: Because Live Preview support is controlled by aregistery key in HKEY_LOCAL_MACHINE, enabling or disabling Live Preview is doneon a per-computer basis.
Microsoft Office OneNote 2007

Microsoft Office OneNote 2007 can display a notification area icon that provides fast access to common functionality. Because this notification area icon is a separate process (OneNoteM.exe), launched by OneNote and relaunched during Windows startup, the notification area icon appears only the first time a user connects to the OneNote application. It does not appear on later connections unless the option is explicitly reenabled each time. This behavior occurs because after the initial launch by OneNote, the process is placed in the Windows Startup folder and launched by the Explorer shell at startup. Seamless sessions do not launch the Explorer shell, so the notification area icon is not launched automatically . To make the notification area icon behave properly within a seamless ICA session, publish a batch file or script that launches both OneNote.exe and OneNoteM.exe, rather than just publishing OneNote by itself. Thus, if the user selects the option to show the notification area icon, it appears and if not, the notification area icon exits immediately after launch.
The following is an example OneNote.wsf script file, which you should publish instead of the OneNote application. The script file must reside in the same folder as OneNote.exe and OneNoteM.exe: [#161009]

<package>
<job id="OneNote">
<comment>
File: OneNote.wsf
Description: Launch OneNote and its notification area icon.
Requirements: WSH 5.5 or higher.

Copyright (c) 2007 Citrix Systems, Inc.
</comment>
<runtime>
<description>
Launch OneNote and its notification area icon
</description>
<example>
CScript //nologo OneNote.wsf
</example>

</runtime>
<script language="VBScript">
Set oShell = CreateObject("WScript.Shell")
oShell.Run """" & oShell.CurrentDirectory & "\\OneNoteM.exe"" /tsr"
oShell.Run """" & oShell.CurrentDirectory & "\\OneNote.exe"""

</script>
</job>
</package>

Multimonitor Support

To enable multimonitor support, make the following configuration changes forthe server and client:
Server configuration:
To set the default launch monitor, you must set thefollowing registry key:
HKEY_LOCAL_MACHINE\SOFTWARE\Citrix\CTXHook\AppInit _Dlls\Multiple MonitorHook
Name: DefaultLaunchMon
Type: REG_DWORD
Data: 0=monitor 0, 1=monitor 1, and so forthâ€¦ (255 is the default)
Client configuration:
Edit the PreferredLaunchMonitor setting in theappsrv.ini or .ica file. This setting overrides the default launch monitorsetting in the registry key. The default value is 255, which launches theapplication on the primary monitor. You can change the setting to a value offrom 0 to n-1, where n is the number of monitors on theclient. When set to one of these values, the application launches on thatmonitor. The monitors are ordered top down, left to right.
If an application is configured with a monitor selection that cannot behandled by the client, the application launches in the primary monitor.
Microsoft Office InfoPath 2007

If a Vista 32-bit client launches a published Microsoft Office 2007 InfoPathseamless session with16-bit high color, the background color might change witheach keystroke. To solve this problem, launch the published Microsoft Office2007 InfoPath seamless session with 256 color or 24-bit (True Color) color.[#166478]
Microsoft Office PowerPoint

Users cannot highlight a graphical object (bitmap images) in a locally-running text editor (for example, Wordpad), and then copy and paste it to a published PowerPoint application. As a workaround, first copy the object to a published application (for example, Word) and then copy and paste it to the published PowerPoint application. [# 158794]
To enable a file with a .pps extension to open as a PowerPoint slide show using content redirection in a Program Neighborhood Agent session, you must publish the PowerPoint application twice: [#165379]
1. Publish the PowerPoint application as Powerpoint with the file type associations set to all except .pps and .ppsx.
2. Publish the PowerPoint application again as Powerpoint Slideshow with the file type associations set to .pps and .ppsx.

Functionality Not Supported

The following features or products are not supported in this release:

Office 2007 is not supported with Conferencing Manager.
Citrix recommends that you do not deploy Microsoft Office Groove with Presentation Server because of the following Groove design issues. [#162133]
- Cannot use the same Groove account on multiple computers without moving the account file.
- Designed to synchronize data between users but not a central server.
- No support for remote drives; thus, file sharing requires using SharePoint files only.
- Storing and synchronizing workspaces increases the load on the servers running Presentation Server.
- DirectSound-based audio, which Presentation Server does not support. Audio messaging and chatting are not available.
Because of Microsoft design changes, you cannot use Citrix Installation Manager to deploy Office 2007. [#155549]

General Issues

When you refresh a list of objects in the Access Management Console (for example, the list of administrators), a dialog box might appear stating there was an unhandled exception. The exception might prevent the table from being populated properly. To avoid this, enlarge the table by dragging the horizontal line separating the table of items in the upper-right pane from the list of tasks in the lower-right pane. [#163022]
To enable remote Access Management Console capability, ensure that Network Com+ is installed on the computer running Presentation Server. [#162679]
After you upgrade to the latest Access Management Console and launch it, a message appears prompting you to choose Upgrade or Donâ€™t Upgrade. Click Upgrade only if you have upgraded all Access Management Consoles to the latest Access Management Console snap-ins released at the same time as Hotfix Rollup Pack 1. Choosing Upgrade specifies that you cannot use an earlier version of console to open the .msc configuration file and you can no longer use the earlier version to see any My Views created with it. However, you are able to use the later version to open the file, and view, edit, and save My Views. If you choose Donâ€™t Upgrade, the file is not upgraded and you can use both versions of the console to see My Views, but you can edit and save My Views only in the earlier version. [#165749]
When publishing an application, a black square might appear in the Access Management Console instead of an icon. This occurs if the selected icon does not contain a 16-color (4 bit) image format. To correct this issue, select an icon that contains a 16-color image format or use icon editing software to generate the 16-color format from the original icon. [#166213]
To upgrade to the latest Citrix Presentation Server pass-through clients from Presentation Server 4.0, upgrade in the following order [#156201]:
1. Presentation Server 4.0 mps.msi
2. Presentation Server 4.5 mps.msi
3. Hotfix Rollup Pack PSE450W2K3R01
4. Presentation Server Clients 10.100 ica32pkg.msi
A published Microsoft Office OneNote 2007 application does not recognize the Vista clientâ€™s local audio and video devices; thus, the published OneNote 2007 cannot record or play audio and video content. [#159522]
The Microsoft OneNote 2007 screen clipping function does not work as expected when using multimonitors. After launching a published application and then launching OneNote, the screen should have a washed-out appearance after selecting Screen Clipping from the Insert menu. The area being selected by dragging the mouse should not be washed out; thus, indicating the selected area. When multimonitor support is enabled, the screen is not washed out; therefore, there is no visual indication of the area selected (although the screen clipping functionality does work). [#166788]

New Fixes in this Release

This hotfix rollup pack introduces the following fixes that have not been previously released:
Application Isolation SDK Client Device Issues Seamless Windows Content Redirection Server/Farm Administration IMA Service Session/Connection Installation Manager Smart Cards Keyboard SmoothRoaming Load Balancing SpeedScreen Logon/Authentication System Exceptions Memory, CPU Optimization TWAIN Printing Miscellaneous Resource Manager
Application Isolation

Browsing .jpg files in thumbnail mode might fail if the .jpg files are located in a folder in an application isolation environment.
[From PSE450W2K3R01][#148412]
GetPrivateProfileInt() might return an incorrect value, causing certain applications published into an application isolation environment fail to launch.
[From PSE450W2K3R01][#156449]
Server CPU utilization might grow heavily. The issue occurs when running applications that call GetModuleFileName repeatedly from an application isolation environment. Such applications include SQL Navigator and many VB applications.
[From PSE450W2K3R01][#157222]
Applications in a Distributed File System (DFS) launched using a batch file in an application isolation environment fail to launch because the applications cannot be found using DFS paths.
[From PSE450W2K3R01][#159049]

Client Device Issues

This feature enhancement adds support for ActiveSync Version 4.5 and Windows Mobile 5 devices. In earlier versions of Presentation Server, using published instances of ActiveSync Version 4.5 to synchronize with Windows Mobile 5 devices fails; an error message appears, stating that ActiveSync 4.5 is required even though ActiveSync 4.5 is installed.
Note: This enhancement is available only on client devices running Windows XP and has been tested only with Version 10.100 of the Presentation Server Client.
To enable synchronization with published instances of Microsoft Outlook, you must add the following registry key:
Key: HKEY_LOCAL_MACHINE\SOFTWARE\Citrix\CtxHook\AppInit _Dlls\VIPHook\outlook.exe
Name: FilePathName
Type: REG_SZ
Data: "D:\Program Files\Microsoft Office\OFFICE11\outlook.exe" -Embedding
Note: The registry key must specify the path to outlook.exe. In this example, the path is: D:\Program Files\Microsoft Office\OFFICE11\outlook.exe.
[From PSE450W2K3R01][#162881]

Content Redirection

Microsoft Outlook might not properly resolve URLs enclosed in quotation marks, such as "www.citrix.com." Instead, the quotation marks are interpreted as %22, resulting in an irresolvable URL that reads http://%22www.citrix.com%22.
[From PSE450W2K3R01][#152783]
Launching HTML (.htm; .html) files embedded in Microsoft Word documents (.doc) fails. The following error message appears instead:
Error Microsoft Internet Explorer
Cannot find file:///C:documents......html
Make sure the path or internet address is correct
To enable this fix, you must set the following registry key:
HKEY_LOCAL_MACHINE\SOFTWARE\Citrix\SFTA\Runtime
Name: IExploreExitDelay
Type: REG_DWORD
Data: <delay, in ms, before ieexplore.exe exits>
For more information, see Knowledge Center article CTX112836.
[From PSE450W2K3R01][#158354]

IMA Service

If there is a change to a Windows or SQL user account that is used by the IMA Service to access the datastore, the IMA Service might not start when the owner of a stored procedure has a different name than the database owner. This issue occurs after a change to the security, account, server and/or permissions used by IMA to access the database.
[From PSE450W2K3R01][#144982]
The IMA Service might exit unexpectedly when adding printers to the compatibility list.
[From PSE450W2K3R01][#154355]
On occasion, the IMA Service fails to start when the server restarts.
[From PSE450W2K3R01][#154617]
The memory consumption of the IMASrv.exe process on a zone data collector may increase over time until it can no longer handle requests.
[From PSE450W2K3R01][#155482]
After installing any hotfix that contains Fix #144982, the IMA Service might take a longer time than usual to start.
[From PSE450W2K3R01][#158104]
After applying this fix, additional information is provided when you run a CDF trace on IMA_Subsystems_UserWin.
[From PSE450W2K3R01][#158364]
The IMA Service might not start in environments where more than 1,024 file type association entries are listed within the registry. To enable this fix, you must set the following registry key:
HKEY_LOCAL_MACHINE\SOFTWARE\Citrix\IMA\Runtime
Name: psrequired
Type: REG_DWORD
Data: 1
[From PSE450W2K3R01][#159315]

Installation Manager

If an error occurs while Installation Manager is reading server groups, no servers are listed for installation packages. With this fix, errors reading server groups are ignored and servers that can be read are listed. An Event Viewer log entry is created for the error.
[From PSE450W2K3R01][#148853]
You cannot add transforms created in Macrovision AdminStudio to Installation Manager packages. The issue occurs because Installation Manager's transform validation mechanism fails transforms created in AdminStudio. After enabling this fix, those transforms can be added to Installation Manager packages. To enable the fix, you must set the following registry key:
HKEY_LOCAL_MACHINE\SOFTWARE\Citrix\IMS\2.0
Name: IgnoreTransformErrors
Type: DWORD
Data = 1
[From PSE450W2K3R01][#159959]
A farm administrator cannot add Installation Manager packages if the Installation Manager network account password exceeds 13 characters.
[From PSE450W2K3R01][#161626]

Keyboard

This fix adds support for the following key combinations for Swiss German keyboard layouts:
Key combination SymbolAlt Gr + 4°Alt Gr + 5 §Alt Gr + 6¬
[From PSE450W2K3R01][#148815]
Users of the Client for Java might experience incorrect keyboard input. This happens when selecting the server default and the client and the server use different input locales. To exclusively use Unicode Injection, set the following registry key: (Unicode Injection is a type of character input that puts Unicode in the foreground application window.)
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Terminal Server\Wds\icawd
Name: UnicodeInjectionFlag
Type: REG_DWORD
Value: 0xFFFFFFFF
[From PSE450W2K3R01][#149966]

Load Balancing

When reading user profiles takes a long time, per-server client session limits might not be honored. To enable this fix, you must set the following registry key:
On 32-bit operating systems:
HKEY_LOCAL_MACHINE\SOFTWARE\Citrix\IMA\MfServer
Name: ResolutionEntryAge
Type: REG_DWORD
Data: <maximum time for logon process of client session, expressed as (number of minutes x 2) +1. For example, to set the maximum time to 15 minutes, use a value of 31>
On 64-bit operating systems:
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Citrix\IMA \MfServer
Name: ResolutionEntryAge
Type: REG_DWORD
Data: <maximum time for logon process of client session, expressed as (number of minutes x 2) +1. For example, to set the maximum time to 15 minutes, use a value of 31>
[From PSE450W2K3R01][#162917]
This fix modifies the Load Manager subsystem to allow load evaluator rules to be created using an MFCOM script.
[From PSE450W2K3R01][#162964]

Logon/Authentication

Reconnecting to a disconnected session using UPN formatted credentials (john.doe@domain.com) fails.
[From PSE450W2K3R01][#149607]
The "Running logon scripts" logon status window might not close after the logon completes.
[From PSE450W2K3R01][#157025]
Under certain conditions, connecting to a server with the Novell Client software installed causes winlogon.exe to terminate unexpectedly.
[From PSE450W2K3R01][#157300]
If the Presentation Server Client's automatic logon credentials contain a domain name not contained in the server's trusted relationships, the logon is still attempted on the server and may succeed if the credentials happen to be valid for a local account on the server.
[From PSE450W2K3R01][#158647]

Memory, CPU Optimization

The memory optimization shell context menu is not visible in Citrix Access Essentials.
[From PSE450W2K3R01][#159995]

Printing

This feature enhancement to the dscheck utility allows you to remove duplicate entries from the printer driver compatibility list. To purge the list of duplicate entries, run "DSCHECK /full printers /purge_driversecurity"
[From PSE450W2K3R01][#152884]
An application launched from a session on client device A might not become aware of a different default printer after connecting to the same session from client device B. For example, the tool tip for the printer icon on the Microsoft Word toolbar does not display the device B default printer after connecting to the same session from device B.
[From PSE450W2K3R01][#155652]
Some documents created with the data type set to RAW do not print using the universal driver.
[From PSE450W2K3R01][#157899]
This is the server-side component of a feature enhancement that allows you to disable the print preview when using the Citrix Universal Printer as the default printer. To get the full feature enhancement, you must also install a client hotfix that includes Fix #159404.
[From PSE450W2K3R01][#159404]

Resource Manager

In some Active Directory configurations, generating billing reports fails when Domain Local Groups belong to Organizational Unit folders. To enable this fix, must apply this hotfix to your Resource Manager database connection server.
[From PSE450W2K3R01][#160601]

SDK

The WinStationQueryInformation API might return an incorrect user name or an incorrect domain name after reconnecting to a session.
[From PSE450W2K3R01][#148418]
The MFCOM APIs AddAdminByName and AddAdminByObject do not work as expected for custom administrators.
[From PSE450W2K3R01][#160818]
Users assigned to a published application using the Citrix User Selector cannot be enumerated using CPSSDK 4.5
[From PSE450W2K3R01][#161474]
Adding alternate packages using the CPSSDK does not work.
[From PSE450W2K3R01][#161771]

Seamless Windows

The seamless toolbar docks on the client, but the desktop workspace is not reduced. To dock the seamless toolbar and reduce the desktop workspace, you must set the following registry key:
HKEY_LOCAL_MACHINE\SOFTWARE\Citrix\CtxHook\AppInit _Dlls\SHAppBar Hook
Name: FilePathName
Type: REG_SZ
Data: shappbarhook.dll
Name: Flag
Type: REG_DWORD
Data: 4
Name: Settings
Type: REG_DWORD
Data: 1
[From PSE450W2K3R01][#144845]
When users are using a published version of Excel in seamless mode and have multiple windows open, the taskbar icon focus is not maintained.
[From PSE450W2K3R01][#145710]
When users are using a published version of Excel in seamless mode and have multiple windows open, a phantom window appears in the upper left corner of the screen.
[From PSE450W2K3R01][#145711]
When Excelhook is enabled, the published application Microsoft Access restores to table view instead of the user interface.
[From PSE450W2K3R01][#148589]
When Excel is running in seamless mode with Excelhook enabled, Excel add-ins are visible on the taskbar. For more information, see Knowledge Center article CTX101598.
[From PSE450W2K3R01][#149254]
When Excel is running in seamless mode with Excelhook enabled, and multiple Excel workbooks are open, the focus goes to the incorrect Excel workbook. For more information, see Knowledge Center article CTX101598.
[From PSE450W2K3R01][#149366]
When the Microsoft Office Seamless Taskbar Support for Excel is enabled, the taskbar icons for Microsoft Office applications may display the characters "??" instead of file names. For more information, see Knowledge Center article CTX101644.
[From PSE450W2K3R01][#152973]
When minimizing an Internet Explorer window using the Minimize button on the title bar, the Language bar, if present, is not minimized.
[From PSE450W2K3R01][#153509]
When Excelhook is enabled, creating a new project in Microsoft Project 2002 and 2003 causes the project to exit unexpectedly.
[From PSE450W2K3R01][#155216]
Microsoft Office Seamless Taskbar Support for Excel may fail after installing certain 3rd party Excel add-ins, such as the Excel Bloomberg add-in. For more information, see Knowledge Center article CTX101644.
[From PSE450W2K3R01][#158788]
When the value 0x20 (TWI_FLAGS_DISABLE_SYSTRAY_AGENT) is added in the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Citrix\wfshell\TWI\SeamlessFlags registry value to disable the SysTray agent, the IME language bar, once minimized, can no longer be restored.
[From PSE450W2K3R01][#161034]
After closing a dialog box associated with a seamless application, focus might shift to a local application rather than to the seamless application.
[From PSE450W2K3R01][#162341]

Server/Farm Administration

The Configure and run discovery process stops enumerating items but does not complete.
[From PSE450W2K3R01][#147890]
Logons to the Presentation Server Console cannot effectively be prevented by setting HKEY_LOCAL_MACHINE\SOFTWARE\Citrix\IMA\Admintool\D isableCMC=1.
[From PSE450W2K3R01][#153294]
After running a discovery, the Access Management Console does not properly enumerate applications and application folders if duplicate application folders exist in the data store. This fix updates the dscheck utility to produce warnings about duplicate entries. To correct the issue, run the utility and remove any duplicate entries it returns from the data store.
[From PSE450W2K3R01][#156720]
The DSCHECK utility does not detect domain trust information missing in the data store. With this fix, the following error message appears when running the utility if there is no trust information for a server in the data store:
"Server Consistency Check: The MetaFrame Server record with HostName <SERVERNAME> at DN<XXXXXXXX> is invalid. The associated Account Authority Server record was not found."
[From PSE450W2K3R01][#163254]

Session/Connection

ICM pings are sent if network traffic is not detected. When a user employs an application that makes constant screen updates, ICM pings are not sent. In this instance, a broken network connection causes the session to wait on the TCP time-out. When the TCP connection times out, the session goes into a disconnected state. This change generates ICM pings on the network connection at the configured rate that is independent of the data sent by the application.
To implement this fix, on the computer running Presentation Server, change the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Citrix\
Name: ForcePing
Type: REG_DWORD
Data: 1
On the client, in Program Neighborhood connection properties, clear Enable Session Reliability.
[From PSE450W2K3R01][#116986]
This enhancement adds wild card support to the functionality introduced by Fix #63894. The original fix addresses the following issues:
- Published applications do not appear in the console
- Application limits do not work if published Application B is launched by published Application A (including scripts and batch [.vbs, .bat, .cmd] files) and Application A is closed while Application B continues to run
For more information, see Knowledge Center article CTX102683.
[From PSE450W2K3R01][#152972]
ICA sessions connecting through the Access Gateway remain active for extended periods of time when idle. This fix adds support for a registry setting that allows the server to utilize ICM to detect disconnected sessions. The time-out for the ICM ping response is determined by the ICA KeepAlive setting in the Console. If a response has not been received before the time-out, the session is disconnected. To enable this fix. set the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Citrix\
Name: ForcePing
Type: REG_DWORD
Data: 1
[From PSE450W2K3R01][#153021]
Sessions might disconnect unexpectedly during shadowing or when connecting to a server using non-Windows clients.
[From PSE450W2K3R01][#156351]
When you use "pn.exe" with the "/PARAM" argument to launch a published application from a command line such as
c:
cd "\Program Files\Citrix\ICA Client"
pn.exe /PN:CPR157801 /APP:AAA /PARAM:"-H -S 10"
the following error message appears: "[published_app_name] failed to start. The Citrix server is unable to process your request to start this published application at this time. Please try again later. If the problem persists, contact your administrator."
The issue occurs when session sharing is disabled by setting the following registry key:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Co ntrol\Citrix\Wfshell\TWI\SeamlessFlags = 1.
[From PSE450W2K3R01][#158558]
The wfshell.exe process might become unresponsive, preventing sessions from terminating when logging off.
[From PSE450W2K3R01][#163516]
Server read data might become corrupt if the data transfer spans two or more Wdica CdmAccelerator cache blocks.
[From PSE450W2K3R01][#163781]

Smart Cards

Under some circumstances, after disconnecting and then reconnecting to a session, with a Group Policy set to "Lock Workstation" upon removal of a smart card, the session is not disconnected when the card is removed.
[From PSE450W2K3R01][#146953]
Every time a state change occurs on the smart card reader, the number of WinLogon handles grows.
[From PSE450W2K3R01][#162828]

SmoothRoaming

SmoothRoaming might fail to reconnect users to their applications. This occurs when users are connected to multiple applications and close the first application launched in the session.
[From PSE450W2K3R01][#157399]

SpeedScreen

Published instances of Internet Explorer might display images on Web pages incorrectly.
[From PSE450W2K3R01][#137390]
With local text echo enabled, character spacing might be incorrect.
[From PSE450W2K3R01][#152762]
Custom multimedia applications that use mciSendString to access DirectX might fail if SpeedScreen Multimedia Acceleration is enabled. After applying this fix, you must set the following registry key.
Note: Setting this registry key interferes with commercial media players (Windows Media Player, RealPlayer). Do not install and use custom and commercial media players on the same server.
HKEY_LOCAL_MACHINE\software\Citrix\SpeedScreenMult imedia
Name: SendEOS
Type: REG_DWORD
Data: 1
[From PSE450W2K3R01][#154841]
Some images do not appear in instances of Internet Explorer launched from the server console.
[From PSE450W2K3R01][#157226]
With SpeedScreen browser acceleration enabled, some images do not appear in instances of Internet Explorer launched within an ICA session.
[From PSE450W2K3R01][#160547]

System Exceptions

Servers might experience a fatal error, displaying the error message "IRQL_NOT_LESS_OR_EQUAL (a) in VDTW30.DLL". To resolve the issue and enable variable screen size settings, you must set the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Terminal Server\Wds\icawd\thin16\IcaThinWireFlags
Caution: The ICAThinwireFlags are bit flags (each bit represents a different flag). The aggressive exception handling flag is 10000 (hex). You must merge this value with the current contents of the registry. For example: if ICAThinwireFlags contains the value 63 (hex), you must set it to 10063 (hex).
[From PSE450W2K3R01][#137849]
On occasion, servers might experience a fatal error on wdica.sys with a stop code of 0x50.
[From PSE450W2K3R01][#158549]
The Access Management Console reports the following error after logging off a session and then refreshing the Sessions view:
"An error occurred. Try performing the task again."
[From PSE450W2K3R01][#159586]
Corrupted data contained within the data store might cause the IMA Service to terminate unexpectedly.
[From PSE450W2K3R01][#160210]
Servers might experience a kernel trap (Stop 8e) when accessing vdtw30.dll.
[From PSE450W2K3R01][#160429]
Servers might experience a fatal error on vdtw30.dll with bugcheck code 7E.
[From PSE450W2K3R01][#160592]
Under some circumstances, reconnecting to a session might cause the server to become unresponsive and to reject subsequent connection attempts.
[From PSE450W2K3R01][#160606]
Servers might experience a fatal error on vdtw30.dll with bugcheck code 8E.
[From PSE450W2K3R01][#160838]
Servers might experience a fatal error on CDM.SYS with stop code 7f.
[From PSE450W2K3R01][#160873]
The IMA Service might exit unexpectedly or not start after restarting the server.
[From PSE450W2K3R01][#161526]
The IMA Service might exit unexpectedly with EventID: 0xC0001B7A (7034).
[From PSE450W2K3R01][#162472]
Internet Explorer might exit unexpectedly on SpeedScreenFilter.dll.
[From PSE450W2K3R01][#162516]
Servers might experience a fatal error on vdtw30.dll when session space paged pool memory usage reaches its upper limit.
[From PSE450W2K3R01][#162674]
Servers might experience a fatal error on vdtw30.dll and restart after installing Presentation Server 4.5.
[From PSE450W2K3R01][#162915]
Servers might experience a fatal error on vdtw30.dll when the system is low on memory.
[From PSE450W2K3R01][#164795]

TWAIN Redirection

When using TWAIN redirection, some dialog boxes might not close as expected. This is the server-side component of a fix that allows dialog boxes to close as expected. To get the benefit of this fix, you must also install Version 10.100 of the Presentation Server Client and set the following registry key on the client:
HKEY_LOCAL_MACHINE\SOFTWARE\Citrix\TWNHOOK
Name: Flag
Type: REG_DWORD
Data: 0x1
[From PSE450W2K3R01][#146416]

Miscellaneous

In an environment where Presentation Server is installed, users of NFS client software cannot access Unix-based resources.
[From PSE450W2K3R01][#138309]
Applications might take 30 seconds or longer to initialize. Additionally, the Microsoft Windows Installer service is in a â€˜Startedâ€™ state after launching the application.
[From PSE450W2K3R01][#156749]
Error messages related to Citrix Health Monitoring and Recovery appear in the Event Viewer after running Repair.
[From PSE450W2K3R01][#160623]
Opening and initializing mapped client COM ports is very slow.
[From PSE450W2K3R01][#163866]

Fixes from Previously Released Hotfixes

This hotfix rollup pack includes the following fixes from replaced hotfixes:

In an environment where multiple administrators are performing session management tasks on a single computer running Presentation Server, the IMA service might terminate unexpectedly or the tasks might fail to complete.
[From PSE450W2K3001][#159839]
The IMA Service might exit unexpectedly when a server restarts.
[From PSE450W2K3002][#160497]
Autocreated printer queues go offline when a print job is spooled with the following configuration: The "Legacy client printers" policy is enabled with the "Create old-style client printers" option selected, and the "CLIENTNAME" value in the ICA session is not all uppercase.
[From PSE450W2K3003][#161053]
An application that attempts to query the idle time of sessions on a server through a DCOM connection might return incorrect information or fail, displaying the message "The remote procedure call failed. (Exception from HRESULT: 0x800706BE)".
[From PSE450W2K3004][#160155]
Zone preference and other policies might not be applied reliably.
[From PSE450W2K3005][#160033]
When printing using the universal printer, the default output settings such as paper size and orientation are fixed. This fix offers a workaround by allowing administrators to set default values for the universal printer.</SPAN></SPAN></SPAN></SPAN></SPAN> To do this, set the following registry keys as needed:
HKEY_LOCAL_MACHINE\SOFTWARE\Citrix\Print\UPDDevmod e
Name: see chart
Type: see chart
Data: see chart
NameTypeDatadmOrientationREG_DWORD1 = portrait, 2 = landscapedmPaperSizeREG_DWORD1 = letter through 118 = last paper defined in paper tabledmPaperLengthREG_DWORD1 - 65535dmPaperWidthREG_DWORD1 - 65535dmScaleREG_DWORD1 - 1000dmCopiesREG_DWORD1 - 9999dmDefaultSourceREG_DWORD1 - 15dmPrintQualityREG_DWORD1 = draft, 4 = highdmColorREG_DWORD1 = monochrome, 2 = colordmDuplexREG_DWORD1 = simplex, 2 = horizontal, 3 = verticaldmYResolutionREG_DWORD32 - 65535dmTTOptionREG_DWORD1 = bitmap, 2 = download, 3 = substitute, 4 = outlinedmCollateREG_DWORD0 = false, #1 = truedmLogPixelsREG_DWORD0 - 65535dmBitsPerPelREG_DWORD0 - 65535dmPelsWidthREG_DWORD0 - 65535dmPelsHeightREG_DWORD0 - 65535dmFormNameREG_SZForm name, such as letter, A4, tabloid, or other available form options
[From PSE450W2K3006][#155984]
Installation Manager cannot install transforms that are not at the same location as the original installation package, and cannot install transforms that include a space in the installation path.
[From PSE450W2K3007][#162999]
Autocreated printers created using the legacy naming style might not be deleted when a session is terminated. The issue occurs if the Print Spooler and Citrix Print Manager Service restart while a session is active on the server.
[From PSE450W2K3008][#163396]
The IMA Service and/or the Citrix XML Service might exit unexpectedly during Web Interface logons.
[From PSE450W2K3009][#155461]
Custom administrators cannot see the job status of Installation Manager packages.
[From PSE450W2K3010][#163095]
Applications cannot bind to virtual loopback if both virtual IP and virtual loopback are enabled. This fix adds support for the following registry settings as a workaround:
On 32-bit operating systems:
HKEY_LOCAL_MACHINE\SOFTWARE\Citrix\VIP
Name: PreferLoopback
Type: REG_DWORD
Data: 1
HKEY_LOCAL_MACHINE\SOFTWARE\Citrix\VIP
Name: PreferLoopbackProcesses
Type: REG_MULTI_SZ
Data: <list of processes>
On 64-bit operating systems:
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Citrix\VIP
Name: PreferLoopback
Type: REG_DWORD
Data: 1 HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Citrix\VIP
Name: PreferLoopbackProcesses
Type: REG_MULTI_SZ
Data: <list of processes>

[From PSE450W2K3011][#160397]
Server sessions might assume a down state, sometimes with only the CSRSS.exe process running with above average memory consumption.
[From PSE450W2K3013][#162750]
If a user logs on, disconnects, and then reconnects from a client running in a different time zone, the session does not reflect the different time zone.
[From PSE450W2K3016][#155101]
Microsoft Outlook recurring meetings are off by one hour between March 11 and April 1, 2007. The issue occurs because of the earlier start in 2007 of daylight saving time compared with previous years. It is present in scenarios where the Microsoft patch for daylight saving time (Microsoft KB931836) is applied only on the server but not on the client device. To enable this fix, you must set the following registry key:
HKEY_LOCAL_MACHINE\SOFTWARE\Citrix\CtxHook\AppInit _Dlls\Per Session Time Zone\
Name: UseServerTZI
Type: REG_DWORD
Data: 1 (on), 0 (off)
Note: The fix takes effect only for sessions launched after you set the registry key.

[From PSE450W2K3016][#160709]
Taskbar icon support is not available for Microsoft Office applications. This happens because the ExcelHook registry key requires write access permissions instead of read access.
[From PSE450W2K3017][#156781]
When taskbar icon support is enabled for Microsoft Office applications, only one taskbar entry is created for Excel spreadsheets.
[From PSE450W2K3017][#164439]
When Microsoft Office Seamless Taskbar Support is enabled, file names in the taskbar might appear garbled.
[From PSE450W2K3018][#163845]
The UseClientIP portion of the Virtual IP feature does not work in Version 4.5 of Presentation Server.
[From PSE450W2K3022][#163589]

Installing and Uninstalling this Hotfix Rollup Pack

Notes:

This hotfix rollup pack is packaged with Microsoft Windows Installer 3.0 as a .msp file. For more information about deploying these, see Microsoft article 884016 or visit the Microsoft Web site and search on keyword msiexec.
This hotfix rollup pack may or might not prompt you to restart the server when the installation or uninstallation is complete. If you are using the Access Suite Console, you must restart the server after installing or uninstalling this hotfix rollup pack to ensure that it is added to or removed from the console's hotfix inventory list.
If the need arises to restore the original settings and functionality provided by this hotfix rollup pack, you must uninstall the hotfix rollup pack before reinstalling it according to the installation instructions below.

To install this hotfix rollup pack:

Copy the hotfix rollup pack to an empty folder on the hard drive of the server you want to update.
Close all applications.
Run the executable.
Restart the server.
If you are using the Access Suite Console, restart the server to ensure the hotfix rollup pack is added to the console's hotfix inventory list.

To uninstall this hotfix rollup pack:

From the Start menu, select Settings > Control Panel.
In Control Panel, double-click Add/Remove Programs.
Highlight the hotfix rollup pack and click Remove.
Follow the directions on-screen.
If you are using the Access Suite Console, restart the server to ensure the hotfix rollup pack is removed from the console's hotfix inventory list.

Symbols Files Location

(For use only when instructed by Citrix Technical Support) PSE450W2K3R01 Symbols for Windows Server 2003
Files Updated

File Name

Date

Time

Size

00000807.kbd
06/29/2007

04:27p

10,310

AgentSVC.exe
07/02/2007

12:31a

180,224

aie.dll
06/29/2007

05:50p

135,168

apsdk.dll
06/29/2007

05:50p

102,400

ccticket.dll
06/29/2007

05:50p

69,632

cdm.sys
07/02/2007

12:35a

361,016

chfarm.exe
07/02/2007

12:33a

151,552

citrix_ima_sals_mf.jar
06/29/2007

07:46p

110,469

Clnthelp.dll
06/29/2007

05:50p

5,120

cmstart.exe
06/29/2007

04:36p

15,360

CPatch.exe
07/02/2007

01:08a

106,496

CPatchbackup_Files.vbs
07/02/2007

01:08a

2,885

CPatchRestore_Files.vbs
07/02/2007

01:08a

4,097

CPatchUI.dll
07/02/2007

01:08a

4,608

cpproc.dll
06/29/2007

05:50p

11,264

cpscom.dll
06/29/2007

05:50p

262,144

CPSCOM.tlb
06/29/2007

08:31p

8,192

CPSCOMPIA.dll
06/29/2007

04:33p

9,216

CpsSdkClient.Diagnostics.dll
06/29/2007

08:52p

24,576

cpssdkclient.dll
06/29/2007

08:52p

372,736

CpsSdkClient.tlb
06/29/2007

08:52p

67,684

CpSvc.exe
06/29/2007

04:23p

352,256

cpupdrv.dll
07/02/2007

12:35a

111,936

Cpupdui.dll
06/29/2007

05:50p

143,360

CtxActiveSync.exe
06/29/2007

04:34p

36,864

CtxAltStr.sys
07/02/2007

12:35a

62,144

ctxgina.dll
06/29/2007

05:50p

167,936

ctxnotif.dll
06/29/2007

05:50p

135,168

ctxpidmn.sys
07/02/2007

12:43a

21,576

ctxprn.dll
06/29/2007

05:50p

69,632

ctxrdpctls.dll
06/29/2007

05:50p

43,008

CtxSbx.sys
07/02/2007

12:43a

162,496

CtxSbxHook.dll
06/29/2007

05:50p

376,832

ctxsecureima.dll
06/29/2007

05:50p

34,304

ctxsfoshellext.dll
06/29/2007

05:50p

94,208

ctxsmcapi.dll
06/29/2007

05:50p

86,016

cutildll.dll
07/02/2007

12:43a

69,768

cyncstat.dll
06/29/2007

05:50p

98,304

dscheck.exe
07/02/2007

12:33a

172,032

DsMaint.exe
07/02/2007

12:31a

81,920

euem_app.dll
06/29/2007

05:50p

114,688

exceldll.dll
06/29/2007

05:50p

13,824

FilterInt.dll
06/29/2007

05:50p

192,512

HCA.Core.dll
06/29/2007

05:10p

57,344

HCAService.exe
06/29/2007

05:10p

20,480

icabar.exe
06/29/2007

04:39p

94,208

icactls.dll
06/29/2007

05:50p

86,016

iexplore.exe
06/29/2007

04:31p

22,016

ImaAdminSs.dll
07/02/2007

12:43a

180,360

IMAAdvanceSrv.exe
06/29/2007

03:45p

147,456

ImaAppSal.dll
07/02/2007

12:31a

167,936

ImaAppSs.dll
07/02/2007

12:43a

413,832

imacom.dll
06/29/2007

05:50p

299,008

imacom.tlb
06/29/2007

08:31p

11,072

imacompia.dll
06/29/2007

04:33p

12,288

imadomain.dll
07/02/2007

12:43a

163,976

ImaFileSal.dll
07/02/2007

12:32a

19,968

ImaFileSs.dll
07/02/2007

12:43a

110,728

IMALogging.dll
06/29/2007

05:50p

163,840

ImaMfRpc_Client.dll
06/29/2007

05:50p

59,392

ImaMsgs.dll
07/02/2007

12:43a

42,632

ImaPolicySs.dll
07/02/2007

12:43a

168,072

ImaPsSs.dll
07/02/2007

12:43a

168,072

ImaRaSs.dll
07/02/2007

12:43a

163,976

ImaSql.dll
07/02/2007

12:32a

176,128

ImaSrvSAL.dll
07/02/2007

12:32a

139,264

ImaSrvSs.dll
07/02/2007

12:43a

1,622,152

imass.dll
07/02/2007

12:43a

40,584

imasystem.dll
07/02/2007

12:33a

200,704

imsss.dll
07/02/2007

12:43a

524,424

Imutil.dll
07/02/2007

12:32a

245,760

LMS20Rules.dll
07/02/2007

12:43a

61,576

lmssal.dll
07/02/2007

12:33a

94,208

lmsss.dll
07/02/2007

12:43a

286,856

mfaphook.dll
06/29/2007

05:50p

155,648

MfAppSal.dll
06/29/2007

05:50p

176,128

MfAppSs.dll
07/02/2007

12:43a

536,712

mfcom.exe
06/29/2007

04:19p

421,888

mfcomsrv.dll
06/29/2007

05:50p

1,105,920

MFContentSAL.dll
06/29/2007

05:50p

49,664

MFContentSs.dll
07/02/2007

12:43a

131,208

MfPrintSs.dll
07/02/2007

12:43a

475,272

mfreg.exe
06/29/2007

04:20p

491,520

MfRpcSs.dll
07/02/2007

12:43a

303,240

MFRules.dll
07/02/2007

12:43a

82,056

MfSrvSal.dll
06/29/2007

05:50p

356,352

MfSrvSs.dll
07/02/2007

12:43a

2,515,080

mmhook.dll
06/29/2007

05:50p

44,032

pdcrypt2.sys
07/02/2007

12:36a

186,560

PS450RegBackup.vbs
07/02/2007

01:08a

4,917

Radeappsal.dll
06/29/2007

05:50p

59,392

radeappss.dll
07/02/2007

12:43a

168,072

radecom.dll
06/29/2007

05:50p

126,976

radecom.tlb
06/29/2007

08:31p

4,592

radecompia.dll
06/29/2007

04:34p

6,144

rademsgui.dll
06/29/2007

03:25p

45,056

RadeOfflineAccessDriver.dll
06/29/2007

05:50p

61,440

RadeOfflineDB.dll
06/29/2007

05:50p

11,776

RADESessionSAL.dll
06/29/2007

05:50p

86,016

Radesessionss.dll
07/02/2007

12:43a

1,548,424

radexml.dll
06/29/2007

05:50p

65,536

RMBillingSS.dll
07/02/2007

12:43a

356,488

RMCOM.tlb
06/29/2007

08:37p

5,076

RMCOMPIA.dll
06/29/2007

08:52p

7,168

RMMonitorSS.dll
07/02/2007

12:43a

897,160

scardhook.dll
06/29/2007

05:50p

114,688

seamls20.dll
06/29/2007

05:50p

102,400

sehook20.dll
06/29/2007

05:50p

11,264

shappbarhook.dll
06/29/2007

05:50p

6,656

SMACOM.tlb
06/29/2007

04:03p

8,984

SMACOMPIA.dll
06/29/2007

08:52p

10,240

SpeedScreenFilter.dll
06/29/2007

05:50p

1,318,912

SpeedScreenSession.dll
06/29/2007

05:50p

37,376

Statui.dll
06/29/2007

05:50p

13,312

twcds.dll
06/29/2007

05:50p

15,360

twnhook.dll
07/02/2007

12:43a

934,024

twnmux.dll
06/29/2007

05:50p

90,112

tzhook.dll
06/29/2007

05:50p

18,432

tzuser.dll
06/29/2007

05:50p

21,504

uihook.dll
06/29/2007

05:50p

11,776

UIHookRegister.vbs
07/02/2007

01:08a

2,272

UpdatePath.vbs
07/02/2007

01:08a

1,196

VanportBuildNumUpdate.vbs
07/02/2007

01:08a

2,816

vclipbd.dll
06/29/2007

05:50p

24,576

vdtw30.dll
07/02/2007

12:43a

724,872

viphook.dll
06/29/2007

05:50p

118,784

wdica.sys
07/02/2007

12:43a

283,072

wfshell.exe
06/29/2007

04:34p

102,400

wpnbr.dll
06/29/2007

05:50p

184,320

wsxica.dll
07/02/2007

12:43a

1,667,344

xteConfg.dll
06/29/2007

05:50p

36,352

zlc_font.dll
06/29/2007

05:50p

135,168

cdm.cat (driverfiles)
07/02/2007

12:42a

6,332

ctxaltstr.cat (driverfiles)
07/02/2007

12:42a

6,362

ctxaltstr.inf (driverfiles)
07/02/2007

12:42a

2,782

ctxcdm.inf (driverfiles)
07/02/2007

12:42a

1,351

ctxsbx.cat (driverfiles)
07/02/2007

12:42a

6,783

ctxsbx.inf (driverfiles)
07/02/2007

12:42a

2,867

pdcrypt2.cat (driverfiles)
07/02/2007

12:43a

6,356

pdcrypt2.inf (driverfiles)
07/02/2007

12:43a

1,309

wdica.cat (driverfiles)
07/02/2007

12:43a

6,338

wdica.inf (driverfiles)
07/02/2007

12:43a

742

ctxaboutUI.dll (en)
06/29/2007

03:24p

3,584

ctxactivesyncui.dll (en)
06/29/2007

03:24p

4,096

ImaMsgsUI.dll (en)
07/02/2007

12:33a

49,152

imasrv4mfUI.dll (en)
06/29/2007

03:22p

45,056

LMS20RulesUI.dll (en)
06/29/2007

03:25p

3,584

MfAppSsUI.dll (en)
06/29/2007

03:22p

24,064

mfeventUI.dll (en)
06/29/2007

03:21p

19,456

MfPrintSsUI.dll (en)
06/29/2007

03:22p

2,560

mfsrvssui.dll (en)
06/29/2007

03:22p

3,072

MFStatusUI.dll (en)
06/29/2007

03:21p

13,312

wsxicaUI.dll (en)
06/29/2007

03:23p

8,192

imasrv4mfUI.dll (ru)
06/29/2007

03:22p

45,056

MD5 Checksum

File Name

70ACA60B053234B05E429951629D8650
PSE450W2K3R01.msp
BB8D65422B889AFE9CD4D6619CE75100
00000807.kbd
1660E07F06819B54127A6AD603640E98
AgentSVC.exe
4FB5246313195E6A07C09EE93597CBE0
aie.dll
0EE1B8997DB4B11564E0590EA387E31A
apsdk.dll
93526057A2DEC97872B7089A6DD4854C
ccticket.dll
99C31EEE18209421C95EED73C09D0EAA
cdm.sys
FFF2E09F73EE2A3EAD342B7C08540358
chfarm.exe
3A0877660811CB96BEBD70E839A7A16D
citrix_ima_sals_mf.jar
25FAE1EBA6DF38A39A49DD98E636A569
Clnthelp.dll
6DC0B500FDFE4B1618D0B01C916D21FD
cmstart.exe
D2697D70009115C489C98CAB686CD423
CPatch.exe
26FFE12EE9D01798C12108C535E94AE8
CPatchbackup_Files.vbs
C6F69E3FF644469BE89767173212E7FD
CPatchRestore_Files.vbs
61CC93165A53A84169C944860E074C99
CPatchUI.dll
666D9AF854FD40238ED08F68503F7AF8
cpproc.dll
724E9D7E0D419117832DCED9FDD42BED
cpscom.dll
B1B7EBAE6A2EA13437E8770330D4D9A0
CPSCOM.tlb
23740359779904800DA2A487B9B13632
CPSCOMPIA.dll
1253604B84977B46EC1ECA43DE882B97
CpsSdkClient.Diagnostics.dll
06D2A372D9A9F29AF9513ABB7A97B7FE
cpssdkclient.dll
563639C1DF322FC7D5E7FEDDDBE0DA21
CpsSdkClient.tlb
2ECFD94EB2921934BDD186FA4C903F1A
CpSvc.exe
FBF8C06E6F121DEC676D41FB985FCCF6
cpupdrv.dll
965BA6ED7729EA80CE46D6EA0B6417F2
Cpupdui.dll
5C9797B04B76188E4F386923C6DC926D
CtxActiveSync.exe
05C78040A5EFE9A3A30DE39573C59B63
CtxAltStr.sys
FE5D44A2D00C3F0FF81E744A93077914
ctxgina.dll
75A7155242E5734B5C8E492D21912931
ctxnotif.dll
73720D80FB932FD01AE092D5AA18E5D2
ctxpidmn.sys
960BC5803101AEB31D37D9934CAFAF74
ctxprn.dll
C71905E2A439FE5447F2A3D725DC6FF0
ctxrdpctls.dll
9D9485DE911087BC063A738DEF3F0365
CtxSbx.sys
784CFFF5B03FF69E5CC281F58E4994BB
CtxSbxHook.dll
9043919769D8198CCCFE9C553693AF66
ctxsecureima.dll
0A4E32BE30D7396258A242E4E927C5D1
ctxsfoshellext.dll
9BB0485AC124FEF218C5C25189D96405
ctxsmcapi.dll
6B7EC219874EE5FAB335004B5B1E89D1
cutildll.dll
E08628D01B82914B03D52A49976D40A6
cyncstat.dll
23336D5687ECB955AC0D6B3277BEABCD
dscheck.exe
C4DBBB37424C19B70136940F7233ABAE
DsMaint.exe
B345DC27C54FADCF5281355949E1E865
euem_app.dll
EB8CC9C7DB09F93AC09CCA24110E14EF
exceldll.dll
6F4C1AA2106C11F79C8FDF7DBF72BDC5
FilterInt.dll
A9D6B0AE1A2962603C0D502BCC417185
HCA.Core.dll
546FEE047DD1F10DB754747A12C64A2B
HCAService.exe
F94A5D3B413BAA7EA619093FB5FEF20D
HotfixServiceInstall.dll
1809676A4DF5845DD38194C669BC151C
icabar.exe
CA7CD8AF6448FCFA7A7E44D803C608B9
icactls.dll
5A303B55FA4784BB3AD900AB9B999B50
iexplore.exe
E7BD342A497A9250E009660C2A62AA53
ImaAdminSs.dll
E0BE68474E5F24C2DB0F5EA951FF481F
IMAAdvanceSrv.exe
8D59C66FD05BCA91A42CF833D508290C
ImaAppSal.dll
062115CE1769BF99725AF738240AB757
ImaAppSs.dll
3BEE06E2B75AFDCC2BC25F8A7DBDEC9A
imacom.dll
0371074056B1675F1A168D53F292B645
imacom.tlb
B702B9E2A8010C2E6C21CB60C1464CF1
imacompia.dll
BD86F765F8E5E8781ED73AC1EAE4191F
imadomain.dll
A3C0E975801B151FA627E719068C73A3
ImaFileSal.dll
B27A8F2812F775BB5310D5D81102805A
ImaFileSs.dll
988D81923C4B9C8501FBEAB258626FE3
IMALogging.dll
CF42156BEADAC81D5B9BE9146972DA04
ImaMfRpc_Client.dll
4A10BE8F126911A238707F1CC4045596
ImaMsgs.dll
570754836033802BD148265B483C1CB0
ImaPolicySs.dll
1C9798B8A15EFC7D1ED4695C169DC190
ImaPsSs.dll
244309158C278E275EAEB247DBF765C2
ImaRaSs.dll
C2B7EBF511E544D9566DAA242C3EF9B7
ImaSql.dll
0F015A67F045B30BC1C2077B64F54191
ImaSrvSAL.dll
C108D6CAB43A3A1DDDADB76914060903
ImaSrvSs.dll
BBFAF83798AB8A59592467CC6E4EFAEB
imass.dll
3C68DB069955D393A9124DE30CB02061
imasystem.dll
BDD1947D30162EC0EF7CD2645CFB32F2
imsss.dll
51F7437288E7C46E32FA97C90ACA7463
Imutil.dll
E7EB4D171E886F8888D11EC66739E5D1
LMS20Rules.dll
8C51A46200710A4DEEFA792426067782
lmssal.dll
F88107F54A56E61716903AD932E52A89
lmsss.dll
EA9317D00DD0323FEBD5B6DB38C5B801
mfaphook.dll
646EC707AEB70392E77D148F2F442956
MfAppSal.dll
7611C64546DB898E37C725D7256CAF99
MfAppSs.dll
656D03FAAD10C6A0E5F00804E9E803AD
mfcom.exe
88B8464E146FC5E9B2917D12CD7431BB
mfcomsrv.dll
72EB41387F39829031FAE23F41E2D135
MFContentSAL.dll
5A74DDDCEDCECE7FCDD6C30550083EB3
MFContentSs.dll
C766D6A8A5A57DAD8F6097F5D434F898
MfPrintSs.dll
B6E29792CF9732E54B27CEFF5DEE985F
mfreg.exe
2BDE0E33CB603270DACA7D3B3E76B286
MfRpcSs.dll
81ABCBB4138AECD9846BFC4DEC3A83FA
MFRules.dll
8E7134F2A1E6539DC64D7F31B8147101
MfSrvSal.dll
13D3CF90849586A625F7BEE59D41E934
MfSrvSs.dll
7F97502AC24FFAD2E890C0002FC9976E
mmhook.dll
EFEFD6BBEDB7DD13543D403F826E5650
pdcrypt2.sys
5EB8AA627C1C46CC2AC34C3F7DDD35C0
PS450RegBackup.vbs
961286604B39F048E60020797B7EB0CF
Radeappsal.dll
E01409BD4697A96F600D490125AC179D
radeappss.dll
5D9BC8BA0AFFB34AF145C44C8984AD38
radecom.dll
263BA6EA95D9715A659C617426D5727E
radecom.tlb
142DA5629DB1196DDA14D3B4D7A01775
radecompia.dll
FC91826B551E561F9B4AE237BAFBA975
rademsgui.dll
0067AC0DBFC82B1C2FBCFB2C97456254
RadeOfflineAccessDriver.dll
757735F4CC88D77EACCFA3268EA89401
RadeOfflineDB.dll
F6DD455212B8C01A32FFE2394EC28C3A
RADESessionSAL.dll
C77C68E547AA4C3C6CC196AEE0429798
Radesessionss.dll
44B0099FA86F7975B2284430C49F4FE4
radexml.dll
D24078D14A6ECB27F34B332A7E45D367
RMBillingSS.dll
B34DC5E00A3BAE4455A20D403D9F12B8
RMCOM.tlb
45E546509ABFEDBD5125E0988391FB96
RMCOMPIA.dll
235D988618201390EDEA408D5374F5B1
RMMonitorSS.dll
10366D6DC74CE1CF2ADF92D684CA5FA6
scardhook.dll
C0A1913B0C69768490F0984614170719
seamls20.dll
11EDCF4C09E4268E53E238ECAFE105ED
sehook20.dll
F36A1AF1178C59E13A0C757EDF6CEB8B
shappbarhook.dll
398E41AA9E2604AB87330D465E5AFE23
SMACOM.tlb
49081EB761031931B784180E75882BCB
SMACOMPIA.dll
A0DC4CE64F896DA5F446F9BBEE87ECC2
SpeedScreenFilter.dll
DCA515DBE3D5F90B6DC0EFC501E545DD
SpeedScreenSession.dll
4BCE55F03B6B1F647B3FA6261B2B982E
Statui.dll
E4DC9CDC553577C4C43F49E08F78F34E
twcds.dll
9D1A1DD901E50FB4A49787E7A75768B4
twnhook.dll
58BE895B47339BB984AC3DBB5625BF2C
twnmux.dll
594D92BD51763AB183622D61FB2478D9
tzhook.dll
966C249C63A11DEC4AD276253CB6D1FB
tzuser.dll
AA4276A6DE73C1986284AA077EC36E99
uihook.dll
AB1EC9037397BBD4C0E4F40405B89D4E
UIHookRegister.vbs
133861D33EA233BFC7551239C65B2D45
UpdatePath.vbs
3D56B1094A71935A51640922D802E334
VanportBuildNumUpdate.vbs
13F35A16423DD7A7D83F97AF299E9A9B
vclipbd.dll
31FA359ABF31C42899936EE5496B0016
vdtw30.dll
36D3A02D7A52AFC436304427AC781DCE
viphook.dll
9DBE5F4F98B37726CE2E5FF94989E567
wdica.sys
DA48204BFFD0CCFD9EB7478A478569D6
wfshell.exe
6328EF636DD36D3EF87668FA3D3C57A6
wpnbr.dll
575217E0FAB4C11C5BE6C6EB039EEF6F
wsxica.dll
32707A8443BE58041E4068ECF4F91F3A
xteConfg.dll
7DCF4F593931088396DE11CDBC748E36
zlc_font.dll
5DA510428F386DBBDB55EE963A27EDA4
cdm.cat (driverfiles)
88F23598965C1D767B723243928BEF5F
ctxaltstr.cat (driverfiles)
939D93DA2654B423D161D5603066CCBB
ctxaltstr.inf (driverfiles)
E80EBCCE3924726230DFE2696E3D2F43
ctxcdm.inf (driverfiles)
49B0FEABC47DFEEE7CFDBF0AFDFAC2DB
ctxsbx.cat (driverfiles)
7378C6329DBEBE6A1473A9B7500BEA41
ctxsbx.inf (driverfiles)
76664A3FB4B79B3ADEBA56404FC95D78
pdcrypt2.cat (driverfiles)
A002230C192746345BB63E1C152E94B4
pdcrypt2.inf (driverfiles)
81933D5C11D730F3111EF083A20F07E2
wdica.cat (driverfiles)
1A70DE61A8E9D3EE8A357779632E68BC
wdica.inf (driverfiles)
5E439AE92C7A5E2B1C7D80ABF14BF4C5
ctxaboutUI.dll (en)
BE